wAP

Brand: MikroTik

Product Code: RBwAP2nD

Availability: In Stock

RM250.00

Add to Wish List

Compare this Product

Description
Reviews (0)
Custom Tabs

wAP

The wAP is a small weatherproof wireless access point for your mobile devices - perfect for installation outside your house, in the garden, on your porch or anywhere else where you need wireless access from your phone or computer.

The device has one 10/100 Ethernet port, it supports 802.11b/g/n wireless standards. It looks unobtrusive and sleek, available in two colours - black (RBwAP2nD-BE) and white (RBwAP2nD).

The wAP is weatherproof and can be fixed to any external wall from the inside of the case - so that it is securely attached to it's mounting location. The bottom door can also be secured with a special screw, which can only be opened by the owner.

It is also possible to run the Ethernet cable directly behind the unit, to inside the wall, there is a special opening on the back of the case. This way, the unit doesn’t attract attention and blends into any environment.

Product specifications

Details
Product code	RBwAP2nD
10/100 Ethernet ports	1
802.11b	Yes
802.11g	Yes
802.11n	Yes
Antenna gain	2
CPU	QCA9533
CPU core count	1
CPU nominal frequency	650 MHz
License level	4
Max Power consumption	4W
Number of chains	2
Operating System	RouterOS
PoE in	802.3at
Power Jack	1
Size of RAM	64 MB
Storage size	16 MB
Storage type	FLASH
Supported input voltage	11 V - 57 V
Tested ambient temperature	-40C to +70C
Wireless chip model	QCA9533
Wireless standards	802.11b/g/n

Included parts

Ethernet test results

RBwAP2nD		QCA9533 100M one port test
Mode	Configuration	1518 byte		512 byte		64 byte
Mode	Configuration	kpps	Mbps	kpps	Mbps	kpps	Mbps
Bridging	none (fast path)	8.1	98.4	23.5	96.3	173.6	88.9
Bridging	25 bridge filter rules	8.1	98.4	23.5	96.3	70.9	36.3
Routing	none (fast path)	8.1	98.4	23.5	96.3	160.8	82.3
Routing	25 simple queues	8.1	98.4	23.5	96.3	90.8	46.5
Routing	25 ip filter rules	8.1	98.4	23.5	96.3	43.2	22.1

All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Write a review

Shopping cart

wAP

wAP

Product specifications

Included parts

Ethernet test results

Write a review