- Home
- Products
- HP Server
- Mikrotik
- Ubiquiti Networks
- Hikvision CCTV
- Open-Mesh
- Fusion Fiber Splicer
- Hotspot Login Templates
- Services
CCR1009-7G-1C-1S+PC
CCR1009-7G-1C-1S+PC
The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched.
Important changes
No switch-chip - the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.
Combo-port - a single 1Gbit software interface that has two hardware interfaces - an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature.
100Mbps SFP support - this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.
More throughput - because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput.
This unit is equipped with passive cooling enclosure, two heat-pipes and a specially designed heat-sink, so its completely silent. It’s powered by an external 24V 2.5A AC/DC adapter and supports power redundancy if you also power it from the PoE input port.
Unit also includes a LCD touchscreen, smart card slot, microSD and a SFP+ port for 10G connections.
Product specifications
Details Product code CCR1009-7G-1C-1S+PC 10/100/1000 Ethernet ports 7 CPU TLR4-00980CH-10CE-A3b CPU Threads count 9 CPU core count 9 CPU nominal frequency 1 GHz CPU temperature monitor Yes Current Monitor Yes Dimensions 272x190x47mm License level 6 Max Power consumption 33W Number of USB ports 1 Operating System RouterOS PCB temperature monitor Yes PoE in Yes Power Jack 1 SFP+ ports 1 Serial port RS232 Size of RAM 2 GB Storage size 128 MB Storage type NAND Supported input voltage 14 V - 57 V Tested ambient temperature -20C .. +60C USB Power Reset Yes USB slot type microUSB type AB Voltage Monitor Yes Included parts
Ethernet test results
CCR1009-7G-1C-1S+PC Tile 9 core all port test 1GHz with combo-port and SFP+ Mode Configuration 1518 byte 512 byte 64 byte kpps Mbps kpps Mbps kpps Mbps Bridging none (fast path) 1,300.4 15,792.1 3,759.4 15,398.5 14,874.0 7,615.5 Bridging 25 bridge filter rules 1,100.4 13,363.3 1,183.8 4,848.8 1,184.0 606.2 Routing none (fast path) 1,300.4 15,792.1 3,759.4 15,398.5 14,581.0 7,465.5 Routing 25 simple queues 1,300.4 15,792.1 1,686.0 7,175.6 1,699.6 1,142.1 Routing 25 ip filter rules 615.8 7,478.3 660.9 2,812.8 668.3 449.1 - All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Related Products(3)CCR1009-7G-1C-PC
CCR1009-7G-1C-PCThe new updated revision of CCR1009 is here. We attempted to combine all the custome.....RM2,100.00CCR1016-12G
CCR1016-12GCCR1016 is an industrial grade super fast router with cutting edge 16 core CPU. If you ne.....RM3,200.00CCR1016-12S-1S+
CCR1016-12S-1S+CCR1016 is an industrial grade router with a cutting edge 16 core Tilera CPU. If you .....RM4,220.00Copyright 2007-2023 Hotspotsystem.com.my .All rights reserved.Company Registration by: HOTSPOT SYSTEM SOLUTION (IP0498998-A)
- Mikrotik
- HP Server